Brother GTX pro Instruction Manual page 35

1st layer
[Nozzle Check CMYK]
[Test Print]
[Nozzle Check White]
[Print Data Load]
[Receiving History]
[Maintenance Part Clean/Replace]
[White Ink Circulation]
[Head Replacement]
[Install Ink after Replacing Head]
[Maintenance]
[Initial Ink Installation]
[Exchange color filter]
[Printer transport preparation]
[Log copy to USB]
[Print Direction]
[Back Light]
[Auto Screen Erase Time]
[Menu TimeOut Setting]
[Speaker Volume]
[Temperature]
[Preview display settings]
[File name display setting]
[Platen Obstacle sensor]
[Platen too low sensor]
[Low Temperature Mode]
[Printer Setting]
[Auto Cleaning Setting]
[Auto Cleaning Start Timing]
[Flushing Interval Setting]
[Flushing Volume Setting]
[Wiping frequency]
[Auto Job Delete]
[IP Address Set]
[Network filtering]
[Shortcut button]
[Cartridge Attach/Remove Check]
[CR Speed Adjustment]
2nd layer
35
Description
This is the test pattern to check to see if ink-jet droplets are
ejected from the color heads properly or not.
This is the test pattern to check to see if ink-jet droplets are
ejected from the white head(s) properly or not.
With this menu item, any print data stored in a USB flash
memory (ARXP or ARX4 file) is loaded into the system.
By selecting this menu item, you can display any print data
received in the order in which they are sorted from the
newest to the oldest ones, and you can select any one of
them.
Use when performing printer maintenance.
Use when configuring the printer.
Menu list