Safety Warnings Summary - Juniper QFX10002 Quick Start Manual

11. Commit the configuration to activate it on the switch.
[edit]
root@# commit
Step 3: Keep Going
IN THIS SECTION

Safety Warnings Summary | 6

Power Cable Warning (Japanese) | 7
Contacting Juniper Networks | 7
See the complete QFX10002 documentation at https://www.juniper.net/documentation/product/en_US/qfx10002.
Safety Warnings Summary
This is a summary of safety warnings. For a complete list of warnings, including translations, see the QFX10002 switch
documentation at https://www.juniper.net/documentation/product/en_US/qfx10002.
WARNING:
Permit only trained and qualified personnel to install or replace switch components.
Perform only the procedures described in this quick start and the QFX10002 documentation. Other services must be
performed only by authorized service personnel.
Before installing the switch, read the planning instructions in the QFX10002 documentation to make sure that the site
meets power, environmental, and clearance requirements for the switch.
Before connecting the switch to a power source, read the installation instructions in the QFX10002 documentation.
The QFX10002-72Q weighs 68.6 lbs (31.1 kg), the QFX10002-60C weighs 80.5 lbs (36.5 kgs), and the QFX10002-36Q
weighs 54 lbs (24.5 kg). Installing the switch in a rack or cabinet requires either a mechanical lift or two people to lift
the device and another person to secure it to the rack. To prevent injury, keep your back straight and lift with your legs,
not your back.
Failure to observe these safety warnings can result in personal injury or death.
6