Safety Warnings Summary - Juniper QFX5120 Series Quick Start Manual

root@# commit
14. Configure in-band management or out-of-band management:
In in-band management, you can configure a network interface or an uplink module (expansion module) interface as
the management interface and connect it to the management device. In this scenario, can do either of the following:
Use the automatically created VLAN named "default" for management of all data interfaces as members of the
default VLAN. Specify the management IP address and the default gateway.
Create a new management VLAN. Specify the VLAN name, VLAN ID, management IP address, and default gateway.
Select the ports that must be part of this VLAN.
In out-of-band management, you use a dedicated management channel (MGMT port) to connect to the management
device. Specify the IP address and gateway of the management interface. Use this IP address to connect to the
switch.
15. (Optional) Specify the SNMP read community, location, and contact to configure SNMP parameters.
16. (Optional) Specify the system date and time. Select the time zone from the list. The configured parameters are displayed.
17. Enter yes to commit the configuration. The configuration is committed as the active configuration for the switch.
You can now log in by using the CLI and continue configuring the switch.

Safety Warnings Summary

This is a summary of safety warnings. For a complete list of warnings, including translations, see the QFX5120 documentation
at https://www.juniper.net/documentation/product/en_US/qfx5120.
15