3M SCOTT AIR-PAK X3 PRO Operating & Maintenance Instructions page 4

All information, illustrations, and specifications in this manual are based on the latest product information available at
the time of publication. 3M reserves the right to make changes at any time without notice.
The contents of this manual may not be used, reproduced, or disclosed to any third party in whole or in part without
obtaining express written permission and authorization from 3M.
Cautionary Notice
While the manufacturer has attempted to detail in this manual all areas of possible danger to personnel in connection
with the use and servicing of this equipment, personnel should use caution when installing, inspecting, operating, and
servicing this equipment, especially when handling pressurized air cylinders. When maintaining or operating all
electronic equipment, care should be taken to avoid electrical shock in all circuits where substantial currents or
voltages may be present through design or component failure. Caution should be observed in lifting and hoisting
heavy equipment.
The manufacturer is specifically not liable for any damage or injury arising out of a user's failure to follow the
instructions contained in this manual or failure to exercise due care and caution in the installation, operation,
inspection, and service of this equipment.
Import and Export
The international transport of this equipment and any related documentation is regulated under United States export
laws and regulations and may be regulated by the import or export laws and regulations of other countries.
If you have any questions or concerns regarding these regulations, contact 3M at 1-800-247-7257 (704-291-8300
outside the continental United States).
Questions or Concerns
If you have any questions or concerns regarding use of this equipment, contact your authorized 3M distributor, or
contact 3M at 1-800-247-7257 (704-291-8300 outside the continental United States) or
ScottTechSupport@mmm.com.
For all National Fire Protection Association (NFPA)-compliant versions of this respirator, report any operational
malfunctions to the certification agency Safety Equipment Institute (SEI), 1307 Dolley Madison Blvd, Suite 3A,
McLean, VA 22101, (703) 442-5732, Fax (703) 442-5756.
For all National Institute for Occupational Safety and Health (NIOSH)-compliant versions of this respirator, report
any complaints of damage, malfunction or failure of the breathing apparatus that may represent a hazard to the user
to the certification agency NIOSH/NPPTL/Respirator Branch, P.O. Box 18070, Pittsburgh, PA 15236, (412)
386-4000.