Appendix H Options & Accessories - 3M SCOTT AIR-PAK X3 PRO Operating & Maintenance Instructions

The 3M Scott Air-Pak X3 Pro may be equipped with one or more accessories or options. The respirator user must
determine which accessories or optional components are installed on the respirator. In addition, the respirator user
must receive training in the operation of the respirator including the operation of all options and/or accessories
incorporated in the respirator.
Become thoroughly familiar with the operation and maintenance of the accessories and options as explained in this
manual and in all other instructions provided with this respirator or the option or accessory. These and other options
may be added to a respirator after purchase. Refer to the instructions provided with the accessories or optional
components for details of the operation and the required changes to the regular operational inspection.
Available options and accessories include the following:
•
Spectacle corrective lens kit
•
Quick-disconnect on the mask-mounted regulator
•
Emergency Breathing Support System (EBSS) accessory hose to supply air to or receive air from another
respirator user or to connect to an extended duration air supply hose line
NOTE
The Universal EBSS fittings are not compatible with older 3M Scott Air-Pak SCBAs. For SCBAs
manufactured prior to the NFPA 1981, 2018 edition standard, please contact 3M for upgrade options.
•
Alternate escape waist belt (EZ-Scape Pro). Refer to the inspection and use instructions provided with the waist
belt before use. Additional training is required before use of an escape waist belt.
•
Various electronic telemetry and communications devices
•
Distress alarm (Personal Alert Safety System), which monitors the motion of a respirator user and emits an
audible signal when the user has not moved for a specified period of time. When installed, the PASS device also
powers the Heads-Up Display end-of-service time indicator.
•
Chest strap accessory
•
Waist belt extension
•
Neck carrying strap for the facepiece
For information about available options and accessories for the Air-Pak X3 Pro, contact 3M or your authorized 3M
distributor.
P/N 595373-01 Rev C
Rev C
202004
P/N 595373-01
202004
OPTIONS & ACCESSORIES
APPENDIX H
63