Installation And Setup Overview - Xerox PHASER 6140 User Manual

Installation and Setup

Installation and Setup Overview

Before using the printer, you must:
1. Make sure the printer is set up correctly in an appropriate location. For details, see
Location for the Printer
2. Select a connection method. For details, see
3. Make sure the printer is connected correctly. For details, see
4. Turn on the printer and the computer. The printer's Configuration page should print by default. If it
does not, see Configuration Page
Configuration page for referencing network settings such as your printer's IP address.
5. If connected to a network, configure network settings. For details, see
Settings on page 34.
6. Install drivers and software utilities from the Software and Documentation CD. The software
installation procedure used depends on your connection type (network or USB). For details, see
Installing the Printer Drivers
Note: If the Software and Documentation CD is not available, you can download the latest drivers
from www.xerox.com/office/6140drivers.
30 Phaser 6140 Color Laser Printer
User Guide
on page 31.
Choosing a Connection Method
on page 25. If you are connected to a network, keep the
on page 38.
Choosing a
on page 32.
Connecting the Printer
Configuring Network
on page 32.