Maintenance Mode Menu - Xerox PHASER 6140 User Manual

Item
Startup Page
Odd Page 2Sided
(Phaser 6140/ND printer
configuration only)
Power On Wizard

Maintenance Mode Menu

Use this menu to configure color registration and to reset defaults.
Item
F/W Version
Auto Regi Adj.
Adjust Color Regi.
Clear Developer
Toner Refresh
Description
Automatically prints the Configuration page when the printer is turned on.
• On
• Off
If the optional duplex unit is installed, this specifies the process for the last
odd page in a 2-sided print job.
• 1 Sided
• 2 Sided
Resets the Power On Wizard. The first time the printer is turned on, a special
menu appears on the printer control panel you can use to configure certain
initial settings such as language, default paper size, and network settings.
The Power On Wizard setting enables the administrator to reset the Power
On Wizard so that the next time the printer is turned on, this special menu
appears.
Description
Displays the current firmware version installed in the printer.
Auto Registration Adjust. When On (the default), the color registration is
adjusted automatically.
Adjust Color Registration. Used to correct the color registration. For details,
see Color Registration on page 143.
• Auto Adjust: Use to force an automatic color registration correction.
• Color Regi Chart: Prints the color registration chart used to check for
correct color registration.
• Enter Number: Use to select and correct color registration numbers.
Fast Scan (1): For setting horizontal color registration, or Slow Scan (2)
for setting vertical color registration.
Resolves print-quality defects associated with charge problems after
high-coverage print jobs.
Resolves print-quality defects associated with charge problems after
low-coverage jobs.
Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
103