Xerox PHASER 6140 User Manual page 124

Maintenance
When moving the printer:
• Always use two people to lift and move the printer.
• When lifting the printer, grasp the areas as shown in the illustration.
Note: Configured with
the optional duplex unit
and 250-sheet feeder,
the printer weighs 24.2
kg (53.24 lb.).
• Do not tilt the printer more than 10 degrees to the front or back, or left or right. Tilting the printer
more than 10 degrees may cause toner spillage.
Caution: Failure to repackage the printer properly for shipment can result in damage to the printer
not covered by the warranty, Service Agreement, or Total Satisfaction Guarantee.
After moving the printer:
1. Reinstall any parts you removed. If you removed the 250-sheet feeder, put the printer back on top
of it.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
4. Adjust the color registration before using the printer. For details, see
page 143.
124 Phaser 6140 Color Laser Printer
User Guide
18.6 kg
41 lb.
6140-027
Color Registration on