Table of Contents
Advertisement
Figure 86 Interface Grouping Application
DHCP Vendor ID option: MSFT 5.0
Click Network Setting > Interface Grouping to open the following screen.
Figure 87 Network Setting > Interface Grouping
The following table describes the fields in this screen.
Table 62 Network Setting > Interface Grouping
LABEL
Add New
Interface Group
Group Name
WAN Interface
LAN Interfaces
Criteria
Modify
Add
13.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Grouping screen to open the
following screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Chapter 13 Interface Grouping
Default: ETH 2~4
192.168.1.x/24
192.168.2.x/24
DESCRIPTION
Click this button to create a new interface group.
This shows the descriptive name of the group.
This shows the WAN interfaces in the group.
This shows the LAN interfaces in the group.
This shows the filtering criteria for the group.
Click the Delete icon to remove the group.
Click this button to create a new group.
PMG5317-T20A User's Guide
eth10.0
VDSL_PoE/ppp0.1
172
Internet
Advertisement
Table of Contents
