Installing
Software
Windows Setup
DOS Setup
Follow the steps below to install the Remote Control Panel
(RCP), Status Monitor, printer driver, and Font Manager for
Windows.
1
Insert the 3.5" diskette labeled "Xerox DocuPrint 4508
Software Installation Diskette" into the disk drive of your
computer.
2
In the Program Manager, click on File, then click on Run and
type:
a :\ s e t u p or b:\setup
Then click OK.
3
Follow the instructions on the screen.
4
Insert the 3.5" diskette labeled "Xerox Font Manager" into
the disk drive of your computer. Follow steps 2 and 3.
Follow the steps below to install the Remote Control Panel
(RCP), Status Monitor, and printer driver software for DOS.
1
Insert the 3.5" diskette labeled "DOS and OS/2 Drivers" into
the disk drive of your computer.
2
Switch to the drive in which the diskette was inserted.
Example: Type a: or b: then press the return key.
3
Type R E AD M E, then press the return key.
4
Follow the instructions on the screen.
C h a p t e r 2 : S e t t i n g U p t h e P r i n t e r
I n s t a l l i n g S o f t w a r e
2-11