Xerox DocuPrint 4508 User Manual page 105

9
Reinstall removed components.
10
Connect the serial interface.
You can use the standard one-to-one DCE type serial cable to connect the printer to the
computer. Table B.1 defines the serial pinout configuration for the printer.
11
With the Serial Interface Setup in the Remote Control Panel, select the appropriate serial
transmission speed for your application.
Confirm serial option setup for your printer matches your PC values.
R S 2 3 2 C S e r i a l I n t e r f a c e O p t i o n I n s t a l l a t i o n
Table B.1 Printer serial pinout
Pin #
1
2
3
4
5
6
7
8
9
A p p e n d i x B : O p t i o n s I n s t a l l a t i o n
Signal Name
Request to Send (RTS)
Transmit Data (TXD)
Receive Data (RXD)
Data Set Ready (DSR)
Ground (GND)
Data Terminal Ready (DTR)
Not Connected (NC)
Data Terminal Ready (DTR)
Not Connected (NC)
B-5