Detecto ICON Series Owner's Manual page 31

Settings Page 6
SETTINGS
Serial Type: Pass
USB: SMA
Print: Manual
<<<
Serial Type:
Touch this key to open the serial type selection screen to change the operation of the Serial
RS232 port. Using the numeric keys, enter a new setting, and then press the Save key.
Allowable settings are: 0 = pass through printing, 1 = Spot LXi
If Spot LXi was selected for Serial Type, the scale will automatically interface to a Welch-
Allyn Spot LXi interface device to transmit weight data.
USB:
Touch this key to open the USB port selection screen to change the operation of the USB
port. Using the numeric keys, enter a new setting, and then press the Save key.
Allowable settings are: 0 = SMA, 1 = Welch Allyn
If SMA was selected, and the scale is connected to a computer for transmission of
weight data to a PC-based electronic medical record software program, it will transmit a
single set of weight data each time a SMA weight request <LF>W<CR> is received.
If Welch Allyn was selected, the scale will automatically transmit data to a Welch Allyn
CVSM Device as soon as a stable weight is obtained.
If PHDC (Personal Healthcare Device Class) was selected, the scale will transmit data
using the CEN ISO/IEEE 11073 Medical / Health Device Communication Standard.
Print:
Touching this key will toggle the Print setting to Auto or Manual for printing (outputting data)
when a stable weight has been obtained on the scale.
If "Auto" is selected, the scale will automatically print (output data) as soon as a stable
weight is obtained.
If "Manual" is selected, after a stable weight has been obtained, you must press the
key to print (output data).
Allowable settings for Print are: 0 = Manual, 1 = Auto
Press the >>> key to advance to the Settings Page 7.
Press the <<< key to return to the Settings Page 5.
Press the Exit key to exit Setup and return to the Weight screen.
1
Requires device to have an activated license. Must purchase Detecto WACONNECT.
3300-0192-0M Rev H icon Clinical Scale Owner's
PAGE 6
Exit >>>
1
1
, 2 = PHDC
25