Detecto ICON Series Owner's Manual page 25

To Enter Setup, Cont.
SETTINGS OVERVIEW 2
Wi-Fi/BLE Module Rev: 1.0.01
Bluetooth: On
BLE Adv: Icon Scale F8:F0:05:D8:9D:DD
Wi-Fi: On, Status: Disconnected
Network SSID: Dynex617
DHCP: On
IP: 192.168.0.133
Mask: 255.255.255.0
Gate: 192.168.0.1
Sonar Exit Setup
Press <<< on top right of touchscreen to return to the Settings Overview 1 screen.
Press the Exit key to exit Setup and return to the Weight screen.
Press the Setup key to advance to the Password screen and proceed with scale setup.
5. After pressing Setup on the touchscreen, the display will change to show
the ENTER PASSCODE screen.
ENTER PASSCODE
Enter passcode to
access settings.
Press CANCEL to
exit.
SAVE CANCEL
6. Using the 10-key on the touchscreen, enter 64870 and then press the Save key.
7. The scale is now ready for setup and calibration
3300-0192-0M Rev H icon Clinical Scale Owner's
<<<
1 2 3
4 5 6
7 8 9
0 .
DEL
This value will
not be shown if
Bluetooth: = Off.
These values will not be
shown if Wi-Fi = Off.
19