Detecto ICON Series Owner's Manual page 10

6. Slide the column cover down onto the base. Note that you may have to pull the cover
out slightly to clear the USB port and the AC power jack.
7. Place the scale base cover on the scale base and press down on both sides of the
cover. Note that a clicking sound will occur when the cover is snapped in place.
Step 6
8. Remove the sonar bracket by pushing up from the bottom of the bracket (see Step 8a)
until the screws are aligned with the large end of the slotted holes (see Step 8b) in the
bracket and pull it away from the column. Set the sonar bracket aside.
9. Align the wire connector from the end of Sonar tube with the wire connector from the
back of column and plug together.
Step 8a
4 3300-0192-0M Rev H icon Clinical Scale Owner's
Step 8b
Step 7
Step 9