Configuring Emergency Transfer Relay (ETR)
Note:
A call in progress will be terminated when ETR is activated either automatically or
Note:
manually.
Viewing ETR state
You can enter show etr to display ETR information. This information includes the following:
Admin state (auto or manual-on)
●
Module status (in service, out of service, or out of service waiting for off-hook)
●
Trunk number of the trunk connected to ETR
●
Line number of the line connected to ETR
●
Line status (off hook or on hook)
●
Summary of ETR commands
For more information about these commands, see Avaya G450 CLI Reference, 03-300437.
Table 85: ETR configuration CLI commands
Command
set etr
show etr
326 Administration for the Avaya G450 Media Gateway
Description
Enable Emergency Transfer Relay (ETR) mode, or allow the
gateway to control ETR mode automatically
Display the status of Emergency Transfer Relay (ETR) mode