Scanning To Mailboxes; To Scan To A Mailbox, Perform These Steps - Xerox WorkCentre 7335 System Administrator Manual

Scanning to Mailboxes

Note: Scanning to the Device's hard drive requires the set up of individual Mailboxes to receive
scanned files. Up to 200 Mailboxes can be set up to support this type of scanning. To learn how to set
up an individual Mailbox, refer to the Setting Up Mailboxes topics in the Scanning to the Device's Hard
Drive (Mailboxes) section of this guide, and follow the instructions supplied.
Note: Jobs stored in a mailbox cannot be forwarded or re-routed

To scan to a Mailbox, perform these steps:

1. From the Device's Main screen, press the Scan to Mailbox button.
2. When the Scan to Mailbox screen displays, a list of Mailboxes will be shown. Use the supplied arrow
to scroll through the icons to locate your Mailbox.
3. Select your Mailbox by pressing its selection line on the touch screen.
4. When the Password screen displays, enter your password (series of numbers) using the Control
Panel's numeric keypad.
5. Press the Confirm button on the touch screen.
6. Use the displayed controls to set up scanning parameters, then place your document in the document
handler, and press the Control Panel's large, green Start button.
7. Press the All Services button to return to the Device's Main screen.
74