Xerox WorkCentre 7335 System Administrator Manual page 102

6. Select Close repeatedly until the Tools tab screen is displayed.
7. Wait several seconds for the Auto Clear service to log you out.
8. After the machine is restarted, print a Configuration Report to confirm that each item is configured.
For information on how to print a Configuration Report, refer to the Configuration Report topic in the
Network Connectivity section of this guide.
9. Test the E-mail transmission from the machine by pressing the All Services button, then touching the
on-screen E-mail button, then the New Recipient button. Type in your E-mail address, then press
Close. Place a document in the document handler and press the large, green, Start button, located
to the immediate right of the Control Panel's numeric keypad.
Note: To set up the address book for use with LDAP (network search), refer to the Configure
Authentication for LDAP topic in the Security section of this guide.
90