Comments - Xerox WorkCentre 7335 System Administrator Manual

Comments

This feature can be used to add comments to a Cover Note (Cover Page).
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or the current password. Touch Enter when finished.
3. Touch the Machine Status button on the Control Panel.
4. Touch the Tools tab.
5. Select Setup & Calibration.
6. Touch Comments.
7. Select a Comment number.
8. Touch Create/Delete.
9. Enter a Comment, up to 18 characters, then touch Save.
10. When complete, touch Close until the Tools tab screen is displayed.
11. To exit the Tools tab screen, if desired, wait several seconds for the Auto Clear service to log you out.
122