3 If the thermostat is located on top of another Agilent 1200 Infinity Series
4 Connect the condensation leak tube to the main waste exit of the
1290 Infinity Thermostat User Manual
module place the waste tube assembly into the top cover of the thermostat
and locate the other end in the waste funnel of the module beneath.
Figure 7
Preparation of the Thermostat
thermostat and place into an appropriate vessel. It is possible to either let
the condensation leak tubing exit the module at the front or at the left side
of the module. Make sure that the leak tube is fully fixed on the outlet.
Figure 8
Condensation Leak outlet
Installing the G1330B Thermostat
Installing the G1330B Thermostat
3
27