Chapter 1. What Should Be Done Before Setup - IBM 5294 Setup Procedure

)
Chapter 1. What Should Be Done Before Setup
Contact your system operator and make sure that the preparations for attaching
your controller have been completed .
. Setup Checklist
Before you begin to set up the 5294 Control Unit, answer
the following questions. If the answer to any of the questions
is no, or if you are unsure, contact the person who planned
the setup. You may check the box gas you complete each step.
D
Has the communications equipment for establishing
communications with your system been installed?
D
Has your system been prepared to accept the 5294 Control
Unit?
D
Do you have a filled in copy of the IBM 5294 Setup Form
(see Appendix A for a sample form)?
The IBM 5294 Setup Form should have been filled out
by your planner and given to you. If you do not have
a filled in copy, instructions for filling it out are in the
IBM 5250 Information Display System Planning and
Site Preparation Guide.
::=!'::="::"~
=.~,':::::,:~~
Chapter 1. What Should Be Done Before Setup 1