IBM 5294 Setup Procedure page 30

Note: Field one
=
00 for all displays attached to the 5294 Model S01.
If you attach your controller to an SDLC network, entry fields 1->,2->, and 3->
appear at the bottom of your display.
If you attach your controller to an X.25 network, entry fields 1- >, 2- > , 4- > , 5- >,
and 6-
>
appear at the bottom of your display.
If you attach your controller to an X.21 switched network, entry fields 1- > , 2- >,
9- >, A- > , and 8- > appear at the bottom of your display.
The following setup display should appear. (The arrangement
of Os and Ps and the positions of the entry fields of your
display might not look exactly like the following example.)
o
2 3 4 5
6
0/ D p
1/ D
2/ D
3/ D
1->
00
2-> 01 3-> 0010001000
Does the setup display appear?
YES
-
-
-
-
-
~
NO
-
-
-
- - . ..
If the setup display does not appear, set the 5294
Power switch to Off and repeat steps 2.12 through 3.4.
If it still does not appear, contact your service
representative.
Chapter 3. Setup Display Configuration 21