Table of Contents
Advertisement
Some steps will ask you questions. Depending on how you answer the question,
you might not always go to the next step.
YES
-
-
-
-
-
-
-
-
Words and art that appear to the right of each step are additional information
you might need to complete the task. Always read the information in the step
first and then the additional information.
Make sure ALL the work stations Idisplay stations and
printers) attaching to your controller are powered on.
Your Controller should have the
Power switch set to On and the
Test/Normal switch set to Test.
A symbol that appears in the text, like
~.'
means go to that step.
(This means go to Chapter 3, Step 2.)
.~.'
An arrow, l i k e . ' is used to point out or locate something on the art.
A broken arrow, like
III ••
~
,is used to show action such as push, pull,
turn, go to, and so on.
A small hand, like
, is used to show location and pressing action.
Note: To avoid problems during setup, you should follow the instructions in this
manual step-by-step. If you encounter a problem, instructions to the right of the
steps tell you what to do.
viii
Control Unit Setup Procedure
Advertisement
Table of Contents
