Table of Contents
Advertisement
For convenience, check for the cursor and System Available indicator on the
display station closest to your controller.
The System Available indicator may appear in different positions, depending on
the type of display station.
The Power indicator comes on immediately, followed by
the Ready and Workstation Active indicators.
~,
/
Also, the Cursor (in the upper left corner)
I
and the System Available indicator
:;:u~~~~~::~~~~~~ ~:~:~:::~:r:~~~r.
~~'o
.. _"
~,
Do these indicators on the 5294 Control Unit and the
display station(s) come on?
14
Control Unit Setup Procedure
YES
-
. .
-
-
~
Chapter 3
NO
-
-
-
-
~
If the indicators on the controller or the
display do not appear, there is a problem
with either the cables or the attached
work stations.
Make sure the cables are connected properly
and are tightened, then check that the
terminator switches are set correctly.
If the indicators still do not appear,
contact the person who planned the setup.
Advertisement
Table of Contents
