General Safety Rules; Carbon Oxide; Fuel; Hot Component Parts - APRILIA Quasar 50 Manual

GENERAL INFORMATION
1.3

GENERAL SAFETY RULES

1.3.1

CARBON OXIDE

When an operation must be performed with the engine running, position the motorcycle out of doors or in a well-ventilated area.
Never operate the engine in an enclosed place.
Use an exhaust emission extraction plant when working indoors.
Exhaust emissions contain carbon oxide, which is a poisonous gas and may lead to loss of conscience or even death.
Operate the engine out of doors or, if
1.3.2

FUEL

The fuel used to operate engines is highly flammable and becomes explosive under particular conditions.
Refuelling and engine service should take place in a well-ventilated area with the engine stopped.
Do not smoke when refuelling or in the proximity of sources of fuel vapours. Avoid contact with bare flames, sources of
sparks or any other source which may ignite the fuel or lead to explosion.
DO NOT RELEASE FUEL INTO THE ENVIRONMENT.
KEEP AWAY FROM CHILDREN.
1.3.3

HOT COMPONENT PARTS

The engine and exhaust component parts become hot when the engine is running and will stay hot for some time after
the engine has been stopped.
Wear heat gloves before handling these components or allow for the engine and exhaust system to cool down before
proceeding.
1.3.4

TRANSMISSION OIL

Use PONTIAX HDI SAE 85W - 140 or
possible to use high-quality fluids having equal or higher ratings with respect to A.P.I. GL-5 specifications.
Insufficient lubrication or the use of unsuitable lubricants may result in irreparable damage due to increased wear and
tear of the moving parts.
Do not overtighten the drain plug as this could damage the crankcase.
Used oil contains substances that are harmful to the environment, even small quantities must be disposed of in
compliance with the regulations in force.
To avoid serious skin damage due to prolonged contact with oil, accurately wash the hands after handling the lubricant.
KEEP AWAY FROM CHILDREN.
1
- 4 -
00
working- indoors, use an exhaust emission extraction plant.
ROTRA MP 85W-140 oil. As an alternative to recommended fluids it is
QUASAR 50-100
Release 00/2003- 06