QUASAR 50-100
3.7.1
REMOVING THE DRIVE SHAFT
Remove the transmission cover (1), see 3.7 (TRANSMISSION REMOVAL).
Release and remove the screw (3) and collect the washer.
Extract the complete drive shaft (12) using a mallet to tap it towards the
interior of the casing.
IMPORTANT
When refitting, replace the oil seal inside the transmission
cover (1).
Remove the circlip (4).
Remove the bearing (5).
Release 00/2003 - 06
2
1
ENGINE
3
5
4
3
- 27 -
00