ENGINE
2
3
3
6
5
3
- 28 -
00
3.7.2
CHECKING THE TRANSMISSION
Check that the output shaft gears (1), the double idler gear (2) and the drive
shaft (3) show no signs of wear. Replace any worn components.
Check that the transmission bearings show no signs of scoring or seizing.
Replace as necessary.
Check that the drive shaft slides smoothly. Replace in case of malfunction.
1
3.7.3
REFITTING
THE TRANSMISSION
2
Fit, in the following order, the output shaft (1), the double idler gear (2) and
the washer (3), after lubricating the bearings and the oil seal, see 1.8
(LUBRICANT CHART).
1
Replace the seal (4).
Fit the transmission cover (5).
Tighten the five screws (6) in a cross pattern.
Top up oil level, see 2.12 (CHECKING THE TRANSMISSION OIL LEVEL).
4
6
QUASAR 50-100
Release 00/2003 - 06