ENGINE
QUASAR 50-100
3.6.4
CHECKING THE PRIMARY PULLEY
Check the (fixed and movable) primary pulley and the bush for signs of wear,
breakage, scoring or other damage, and replace as necessary.
Check that the bush slides smoothly inside the (movable) primary pulley. If
not, or if the play is excessive, replace the pulley and the bush.
Check that the outside diameter of the weights is not less than the wear limit,
and if necessary replace them.
Wear limit: 14.5 mm.
Check the condition of the lug holder and of the three driving lugs. Replace
any worn lugs.
3
- 20 -
00
Release 00/2003 - 06