Fitting The Crankshaft Oil Seal - APRILIA Quasar 50 Manual

ENGINE
3
1
1
3
3
- 32 -
00
3.8.6

FITTING THE CRANKSHAFT OIL SEAL

On the left side of the engine, fit the oil seal (1), the circlip and the centring
bush (2) taking care to smear the lip of the oil seal with grease, see 1.8
(LUBRICANT CHART).
To facilitate the fitting, use a drift of suitable diameter.
2
Once the parts are in place, check that the oil seal lip (1) is seated in the
crankcase recess (3) as shown in the figure.
1
Fit the oil seal to the right side in the same manner as described above.
QUASAR 50-100
Release 00/2003 - 06