Cleaning The Printer; Cleaning The Printer Case; Cleaning The Print Head - Epson TM-J7200 Technical Reference Manual

Cleaning the Printer

Cleaning the Printer Case

Be sure to turn off the printer, and wipe the dirt off the printer case with a dry cloth or a damp cloth. Be sure to
unplug the AC cable while cleaning.
CAUTION

Cleaning the Print Head

Perform head cleaning if the print result is not normal as shown in the illustration below.
CAUTION
Follow the procedure below to perform head cleaning.
1
Make sure the printer is turned on.
2
Press the Cleaning button more than 3 seconds.
The Power LED flashes and head cleaning begins.
When head cleaning is complete, the Power LED turns off and the printer can perform normal printing.
Perform a test print to check if printing is performed properly. (See
82
Never clean the product with alcohol, benzine, thinner, or other such solvents.
Doing so may damage or break the parts made of plastic and rubber.
ABC ABC
 Head cleaning takes one to two minutes. Do not open any cover or turn the power off
during head cleaning.
 Do not press the Cleaning button unless there is a problem with print quality.
Unnecessary head cleaning will waste ink.
ABC ABC
"Test Printing" on page 81.)