Epson TM-J7200 Technical Reference Manual page 98

Characters per Line and Printable Area for Slips (TM-J7700)
Print dot count (dots) *
Right margin (mm) *
Print width (mm)
Characters per line
*: With 600 dpi. Parentheses indicate value for 180 dpi.
[cpi: characters per inch (25.4 mm)]
General Print Speed
Print control mode
Normal
High-speed
Economy
[lpi: lines per inch (25.4 mm)]
[lps: lines per second]
98
Font A
Font B
Font A, when increasing
number of lines
Font B, when increasing
number of lines
Special Font A
Font
Font A (6 lpi) (lps)
Font B (8 lpi) (lps)
Graphics (mm/s)
Font A (6 lpi) (lps)
Font B (8 lpi) (lps)
Graphics (mm/s)
Font A (6 lpi) (lps)
Font B (8 lpi) (lps)
Graphics (mm/s)
 Print speed when continuously printing for all lines without cleaning and without character
styles.
 The print speed may decrease due to the transmission status or the combination of commands.
 If the line spacing of the print data is smaller than the font height, the print speed may decrease
due to printing one line at a time.
3200 (960)
4.3
135.6
80 15 cpi
106 20 cpi
87 16.3 cpi
120 22.5 cpi
64 12 cpi
Roll paper width
TM-J7200/ TM-J7700 (mm)
57.5 69.5 76
24.8 23.8 23.2 22.8
33.1 31.7 30.9 30.4
107 102 100 98
24.8 23.8 23.2 22.8
33.1 31.7 30.9 30.4
107 102 100 98
24.8 23.8 23.2 22.8
33.1 31.7 30.9 30.4
107 102 100 98
3257(977)
2.0
137.8
81 15 cpi
108 20 cpi
88 16.3 cpi
122 22.5 cpi
65 12 cpi
Slip paper
82.5 TM-J7200 TM-J7700
19.8 16.9
26.4 22.6
85 73
19.8 16.9
26.4 22.6
85 73
19.8 16.9
26.4 22.6
85 73