Customize Value Setting Mode - Epson TM-J7200 Technical Reference Manual

Customize Value Setting Mode

You can confirm and set the printer's memory switches and customized values.
Item
Autocutter
Auto line feed
Paper width
Command execution during offline
LED indicator when I/F starting
Printer Model Setting Information
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button three times (less than one second), hold it down for at
least one second to enter the Software settings mode (Customized value setting).
The Software setting mode guidance is printed, and the Paper LED flashes.
54
Confirm
✔
✔
✔
✔
✔
✔
 For details on the memory switches and customized values, see
 Settings for Printer Model Setting Information are specified by using the "TM-J7200/TM-J7700
Printer Model Setting Utility". See
Customize Value Settings
Modes
0: Exit
1: Print Current Settings
2: Autocutter
3: Auto Line Feed
4: Paper Width
5: Other Settings
Select Modes by executing following
procedure.
step 1. Press the Feed button less
than 1 second as many times
as the selected mode number.
step 2. Press Feed button for 1
second or more.
Set
✔
✔
✔
✔
✔
-
"Utilities" on page 65.
"Software Settings" on page 39.