Cautions On Handling - Epson TM-J7200 Technical Reference Manual

Cautions on Handling

 Do not use this product in a location with volatile substances such as alcohol or paint thin-
ner, or near fire. Doing so may cause electric shock or fire.
 Shut down the product immediately if it produces smoke, a strange odor, or unusual noise.
WARNING
Continued use may cause electric shock or fire. Immediately unplug the product when a
fault or other problem occurs, and contact qualified service personnel.
 Shut down the product immediately if water or other liquid spills into this product. Contin-
ued use may cause electric shock or fire. Immediately unplug the product and contact
qualified service personnel.
 Never disassemble or repair this product. Tampering with this product may result in injury
or fire.
 Do not use this product in an environment where inflammable gas or explosive gas may
exist. Do not use aerosol sprayers containing flammable gas inside or around this product.
Doing so may cause fire.

Do not connect cables in ways other than those mentioned in the manual. Doing so may
cause fire. (See
Devices" on page
 Do not connect a telephone line to the drawer kick connector or the DM-D connector; oth-
erwise the printer and the telephone line may be damaged.
 Do not connect a LAN cable to the DM-D connector; otherwise the connected device may
be damaged.
 Do not connect a telephone line to the drawer kick connector; otherwise the printer and
the telephone line may be damaged.
 Do not touch the areas inside the product other than those mentioned in this manual.
Doing so may cause electric shock or burns.
 Do not insert metal or flammable materials, or allow them to fall into the product. Doing
so may cause electric shock or fire.
 Do not allow anyone to stand or place heavy objects on top of this product. Equipment
may fall or collapse, causing breakage and possible injury.
 Install the cables and optional products in the proper direction according to the proper
CAUTION
procedures. Failure to install correctly may cause fire or injury. Follow the instructions in
this manual to install them properly. (See
ing the Printer to the Host Devices" on page
 Before moving the product, shut down and unplug the product, and make sure that all the
cables are disconnected. Failure to do so may damage a cable, causing electric shock or
fire.
 Do not store or transport the product in a tilted, standing or upside-down position. Doing
so may cause the ink to leak.
"Connecting the AC Adapter" on page
34.)
"Connecting the AC Adapter" on page
34.)
30, "Connecting the Printer to the Host
30, "Connect-
5