Table of Contents
Advertisement
Maintaining the Printer
Note:
The scanner unit is designed to close slowly and resist a little as a precaution against catching fingers. Continue to close
even if you feel some resistance.
Cleaning the Printer
If the components and the case are dirty or dusty, turn off the printer and clean them using a soft, clean cloth that
has been dampened with water. If you cannot remove the dirt, try adding a small amount of mild detergent to the
damp cloth.
Important:
c
❏ Be careful not to get water onto the printer mechanism or any electrical components. Otherwise, the printer
could be damaged.
❏ Never use alcohol or paint thinner to clean the components and the case. These chemicals can damage them.
❏ Do not touch the parts shown in the following illustration. Doing so may cause a malfunction.
>
Cleaning the Printer
115
Advertisement
Table of Contents
