Printing And Cutting Positions; Electrical Characteristics - Epson TM-J7200 Technical Reference Manual

Printing and Cutting Positions

Autocutting operation is enabled with roll paper only.
22 mm {0.87"}
 The values above may vary slightly as a result of paper slack or variations in the paper. Take this
into account when setting the cutting position of the autocutter.

Electrical Characteristics

Operating voltage
Current consumption
(24V, 25°C, standard print density)
Autocutting position
Printing area
DC 24V ± 7 %
Average: Approx. 1.8 A
Appendix
One point left uncut
on the right side
Paper feed
direction
107