Fuji Xerox Versant 3100 Press Optional Units Manual page 41

Specifications
Item
Two-sided Trim Paper size
Paper weight
Trimming size|
Crease (with Creaser) Paper size
Paper weight
Number of lines
Power supply Power supply
Power consumption
Peak
Dimensions Width 605 x Depth 725 x Height 992 mm
Weight with Creaser
without Creaser
Standard size
Custom size
Uncoated
Coated
6 - 25 mm
Note
Standard size
Custom size
60 - 350 g/m
2
Note
157 g/ m or heavier when not using Saddle Stitch / Bi-Fold. You may also apply

crease to paper weighing 156 g/m
you can fold the output paper sheets easily by hand along the crease lines) can-
not be guaranteed.
If wrinkles occur around crease lines on output sheets when you are using Saddle

Stitch / Bi-Fold, set [Crease Pressure] to a lower value in Stock Library Manager.
For information on [Crease Pressure], refer to "Profiles" in the Stock Library Man-
ager Manual.
1 - 5
Note
When the paper size is less than 279 mm landscape, or is 450 mm landscape or
larger, the number of crease lines is limited to up to three.
100 - 240 V AC±10% 100 V
128 kg
118 kg
Specification
Maximum A3, 13 x 19"
Minimum A4, Letter (8.5 x 11")
Height 194.0 - 330.2 mm
Width 210.0 - 488.0 mm
(trim and crease: - 386.0 mm)
52 - 350 g/m
106 - 350 g/m
Setting a head-to-toe trimming area size of 7 mm or less
may cause damage of the trimmed edges.
Maximum A3, 13 x 19"
Minimum JIS B5
Height 182.0 - 330.2 mm
Width 210.0 - 488.0 mm
(trim and crease: - 386.0 mm)
2
(with Saddle Stitch / Bi-Fold)
2
or lighter, but the crease quality (i.e., whether
4 A, 50 Hz or 60 Hz
240V 2 A, 50 Hz or 60 Hz
100 V 400 W
240V 480W
Chapter 5 Crease/Two-sided Trimmer
2
2
41