Paper Jams - Fuji Xerox Versant 3100 Press Optional Units Manual

5.3 Paper Jams

If there is a paper jam, the printing will be canceled.
The Error Message area of the touch screen will show the affected area in red, along with the message.
Also, the error lamp on the top of the machine will illuminate.
If the priority unit lamp is blinking, you must first clear the paper jam.
If there is a paper jam in the following area, tap the [Faults] and the [Faults] screen will appear, explaining
how to remove jammed papers.
Remove the paper only after you are sure the printer is no longer moving.

After removing jammed papers, be sure to close the cover. Leaving the cover open will not be able to con-
Important 
tinue to print jobs.
Note
Leave the power on and proceed to remove jammed papers.

If there is still paper remaining, the paper jam message will continue to display. Make sure that there is no

jammed paper left and also no jams in other places.
For detailed information on how to regard the messages, refer to "1.2.1 Services Home" in the User Interface
Refer
Manual.
Follow the steps below to clear paper jams in the Crease/Two-sided Trimmer.
1.
Open the upper cover of the Crease/Two-sided Trim-
mer.
44
Optional Units Manual
E1 E2 E3
E4 E5 E6
E7