Fuji Xerox Versant 3100 Press Optional Units Manual page 68

4.
Insert a new staple cartridge into the unit.
5.
Insert the unit to its original position.
6.
Close the cover.
Staple Cartridge for Saddle Stitch
Type of supply
Staples Type XE
1.
Make sure the printer has stopped operations, and
then open the right cover of the Finisher.
2.
Pull out the Saddle Stitch Unit "3" toward you until it
stops.
3.
While holding the tabs on the staple cartridge, pull
out the cartridge to remove it.
Note
68
Optional Units Manual
Product code
CWAA0856
There are two booklet staple cartridges provided.
Check the message to see which cartridge should be
replaced.
Quantity / box
5,000 staples x 2 sets / 1 box