Chapter 3 Inserter; Machine Components - Fuji Xerox Versant 3100 Press Optional Units Manual

Chapter 3 Inserter

3.1
3.2
3.3

3.1 Machine Components

No. Component
1 Inserter Tray (Tray T1)
Error lamp
2
Decurl button
3
4 Cover
Note The Inserter can be only attached to the Interface Decurler Module.
Machine Components............................................................................23
Loading Paper............................................................................................25
Paper Jams..................................................................................................26
4
Load paper to be used for separators or covers sheets.
Illuminates when a paper jam occurs.
If the priority unit lamp is blinking, you must first clear the paper jam.
Use this button if paper curl still persists after setting the curl correction level to the
highest (or the lowest) on the Interface Decurler Module. Steps to correct paper curl is
the same as those for the Interface Decurler Module. This button, however, provides
you with three correction levels only: OFF, upward and downward.
Refer For information about the Curl Correction in the Interface Decurler Mod-
ule, refer to "2.2 Curl Correction" (p.19).
Open this cover to clear paper jams.
2
3
Description
1
Chapter 3 Inserter
23