Garmin G1000 Manual page 44

9. Activate the cursor and use the small FMS knob to highlight GIA 2 in the SELECT GIA UNIT
field and then press the ENT key. The GIA 2 DISCRETE IN page will now be shown.
10. Open the AVIONICS FANS circuit breaker and verify that the box for the GIA 2 FAN (IN* 12)
turns green while the breaker is pulled, and is black otherwise. Close the AVIONICS FANS
circuit breaker.
11. Briefly switch the vapor suppression switch ON and verify that the box for the VAPOR
SUPPRESS R (IN 13) turns green while the switch is ON, and is black otherwise.
12. Extend the speed brakes and verify that the box for the SPEED BRAKE EXTE (IN 14) turns
green while the speed brakes are extended, and is black otherwise.
13. Deactivate the cursor and then select the GFC STATUS page (2
GIA 1 page for the Pitch Servo should be shown by default.
Page 3-2
Revision 1
G1000 V8.XX S/W Load and Post Install Checkout – Columbia 350/400
nd
page in GFC page group). The
190-00577-04