G1000 Software/Configuration Procedure; Figure 2-1. Software/Configuration Overview - Garmin G1000 Manual

Columbia 350/400 v8.xx software loading and post installation checkout

Hide thumbs Also See for G1000:

Table of Contents

wiring harness. Any additional connections, such as pitot/static plumbing, must also be accomplished at

this time.

Throughout the next section of this document, many screen shots and examples are used

to illustrate the software and configuration loading process. Although every effort has

been made to ensure accuracy of such examples, changes may occur. Always refer to the

Required Equipment List for the correct software file names, versions and part numbers.

2.5 G1000 Software/Configuration Procedure

The G1000 is not airworthy unless software and configuration are accomplished successfully as described

in these procedures. The following diagram depicts an overview of the software/configuration sequence

for the G1000 system. If any problems are encountered during the loading process, see Section 2.8. It is

extremely important that each LRU software load be completed successfully.

Page 2-2

Revision 1

G1000 V8.XX S/W Load and Post Install Checkout – Columbia 350/400

NOTE

190-00577-04

Table of Contents