Video Input/Output Settings; Setting The Video Input/Output Format - Roland V-8HD Reference Manual

Video Input/Output Settings

Setting the Video Input/Output Format

Set parameters for the input/output format to match the connected equipment.
Setting the System Format
On the V-8HD, the input/output format is determined according to
the system format. You set the input/output format to match the
connected equipment.
Input format (*1)
System
format
INPUT 1–6 connectors
1080p
1080p, 1080i
1080i 1080p, 1080i
720p 720p
(*1) You can specify separate individual input formats for the
channel 7 and 8 input connectors, regardless of the system
format.
For details, refer to "Setting the Input Formats for Channels 7
and 8" on this page.
(*2) The output format at the OUTPUT 3 connector is fixed at "1080p. "
1 .
Press the [MENU] button0"SYSTEM"0select
"SYSTEM FORMAT," and press the [VALUE] knob.
2 .
Turn the [VALUE] knob to set the system format to
"1080p," "1080i," or "720p," and press the [VALUE]
knob.
3 .
Press the [MENU] button to quit the menu.
Internal processing
The V-8HD's internal processing is progressive. Interlaced input video
is automatically converted to a progressive signal.
The picture might appear jagged at this time, or the picture in a PinP
inset screen or on the multi-view monitor might waver.
This is due to progressive conversion, and is not a malfunction.
About frame rates
To change the V-8HD's frame rate, press the [MENU] button0
"SYSTEM"0"FRAME RATE. "
8
Output format (*2)
OUTPUT 1–2 connectors
1080p
1080i
720p
Setting the Input Formats for Channels 7 and 8
By factory default, the EDID assignment for channels 7 and 8 is
"INTERNAL" (set so that EDID values of all inputtable formats are sent).
To specify an input format of your choice, change the setting of the
EDID information being sent so that it matches the incoming video
signal.
1 .
Press the [MENU] button0"VIDEO INPUT"0select
"INPUT 7 (SCALER)" or "INPUT 8 (SCALER)," and press
the [VALUE] knob.
2 .
Turn the [VALUE] knob to select "EDID," and press
the [VALUE] knob.
3 .
Turn the [VALUE] knob to set the input format (the
EDID information to send), and press the [VALUE]
knob.
Value
EDID information for all inputtable formats is
INTERNAL
sent.
SVGA (800x600/60Hz)
XGA (1024x768/60Hz)
WXGA (1280x800/60Hz)
FWXGA (1366x768/60Hz)
SXGA (1280x1024/60Hz)
SXGA+(1400x1050/60Hz)
4 .
Press the [MENU] button to quit the menu.
UXGA (1600x1200/60Hz)
WUXGA (1920x1200/60Hz)
720/59.94p
1080/59.94i
1080/59.94p