Daikin VRV REYQ96MTJU Design, Installation & Testing Instruction page 21

Si39-406
Positioning the a) An insert is a metal tool which is inserted into a floor or a beam before the concrete is set such
Insert
Example: Steel insert
Important point:
1. The weight of the fitting to be suspended must be taken into account when choosing the insert.
3.2.2 Installation of Indoor Unit
Positioning 3 essential points when installing an indoor unit
1. Height: Take care to account for final ceiling facing surface level
2. Level: Level fitting is essential. (within ±1 degree of horizontal)
General Information
that fittings such as ducts, pipes or suspension bolts for hanging units can be fitted into place
later. The positions of the inserts must be decided early.
Operational steps
Determine
Mark installation
installation
position
position
Fit suspension
Fit indoor unit
bolts
Installation
(V0960)
15