Step 5: Install The 24 V Transducer Power Supply - YASKAWA iQpump Micro Quick Start Manual

iQpump Micro
Quick Start Procedure
STEP
Install the 24 V Transducer Power Supply
5
5.1 24V Power Supply Components
A
A – 24V Power Supply cover
B – CN5 Connector to drive
C – Screw hole (attaches 24V Power
Supply cover)
D – Functional Earth cable connection
(FE)
E – Mounting tabs
<1> One of the four ground wires packaged with the 24V Power Supply must be connected during installation.
IP20/NEMA 1, UL Type 1 Dimensions with 24V Power Supply
The installed 24 V power supply option adds 27 mm (1.06 in.) to the total depth of the drive. Height and width dimensions
are unaffected.
Unpack the 24 V Power Supply
(Underside)
CN5 connector port
Figure 1.1 24V Power Supply Components
27 mm (1.06 in.)
24V Power supply with cover removed
C1
B
E C2
24V AC A2 FE
I H
F – J2/A2 (white) conductor wire
<1>
G – Ground wire
H – Through-slot for J2/A2 wire and
ground wire
I – CN1 Terminal Block-Customer
Connections
Figure 1.2 24 V Power Supply Dimensions
C
D
E
F
G
YASKAWA TOEP YAIQPM 01A iQpump Micro Quick Start Procedure
Page 7
of 31