Table of Contents
Advertisement
• Acct Port
• Timeout
• Retransmit
• Key
Buttons
: Click to undo the addition of the new server.
: Click to apply changes
:
Click to undo any changes made locally and revert to previously saved values.
4.5.2.3 TACACS+
This page allows you to configure the TACACS+ Servers. The TACACS+ Configuration screen in
4-5-2-5
appears.
The UDP port to use on the RADIUS server for accounting.
This optional setting overrides the global timeout value. Leaving it blank will use
the global timeout value.
This optional setting overrides the global retransmit value. Leaving it blank will
use the global retransmit value.
This optional setting overrides the global key. Leaving it blank will use the global
key.
d a new RADIUS server. An empty row is added to the table, and the RADIUS
: Click to ad
server can be configured as needed. Up to 5 servers are supported.
Figure 4-5-2-5: TACACS+ Server Configuration Page Screenshot
User's Manual of IGS-5225 series
306
Figure
Advertisement
Table of Contents
