Qos Control Entry Configuration - Planet Networking & Communication IGS-5225 Series User Manual

•
DEI
• Frame Type
•
Action
•
Modification Buttons

4.4.5.2 QoS Control Entry Configuration

The QCE Configuration screen in
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or
'Any'.
Indicates the type of frame to look for incoming frames. Possible frame types are:
■
Any: The QCE will match all frame type.
■
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are
allowed.
■
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
■
Class: Classified QoS class.
■
DPL: Classified Drop Precedence Level.
■
DSCP: Classified DSCP value.
You can modify each QCE in the table using the following buttons:
: Inserts a new QCE before the current row.
: Edits the QCE.
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
Figure 4-4-5-2 appears.
User's Manual of IGS-5225 series
284