Program Procedure - Nortel Meridian 1 Option 11C Manual

Page 28 of 100 PRI Implementation

Program procedure

LD 17 – Add a PRI card.
Prompt Response
REQ CHG
TYPE CFN
CEQU YES
PRI XX
553-3011-310 Standard 13.00
Note: Before installing PRI cards in IP expansion cabinets, first configure
the expansion cabinets for IP connectivity. Refer to Overlay 117 in the
Meridian 1 Software Input/Output guide (553-3001-511) for further
information.
To implement PRI on Meridian 1 systems, do the following:
1 Add a PRI card. See "LD 17 – Add a PRI card." on page 28.
2 Add a DCHI card. See "LD 17 – Add a D-channel Interface." on page 29.
3 Define a PRI customer. See "LD 15 – Define a PRI customer." on
page 31.
4 Define a PRI service route. See "LD 16 – Configure an ISDN service
route." on page 32.
5 Define service channels (B-channels) PRI trunks. See "LD 14 – Define
service channels and PRI trunks." on page 34.
6 Define clock synchronization. See "LD 73 – Define system timers and
clock controller parameters." on page 34.
Description
Change data
Configuration data block
Changes to common equipment
The PRI digital card number, where:
xx = 1-9 (main cabinet), 11-19 (IP expansion cabinet1), 21-29 (IP
expansion cabinet 2), 31-39 (IP expansion cabinet 3), 41-49 (IP
expansion cabinet 4.)
January 2002