Nortel Meridian 1 Option 11C Manual page 31

LD 15 – Define a PRI customer.
Prompt
REQ:
TYPE
CUST
LDN0
AC2
ISDN
Response
NEW
CHG
NET
0-31
xxxx
NPA
NXX
INTL
SPN
LOC
YES
PRI Implementation
Description
Add new data.
Change existing data.
Networking Data.
Customer number.
Listed Directory number 0 must be defined for ISDN
PRI DID service.
The length of LDN0 determines the number of trailing
digits translated as the dialed DN on PRI DID routes.
Up to seven digits may be entered if DNXP option 150
is equipped. Otherwise, up to four digits may be
entered.
ESN Access Code 2. Enter incoming ISDN call types
(NARS network translation types) for which AC2 must
be inserted when INAC = YES in LD 16 Route Data
Block.
Multiple responses are allowed. Prompted only if NARS
is equipped. If a NARS call type is not entered here, it is
defaulted to AC1.
E.164 National.
E.164 Subscriber.
International.
Special Number.
Location Code.
Customer is equipped with ISDN.
Page 31 of 100
Option 11C 1.5 Mb DTI/PRI