Ricoh FAX2900L Service Manual page 78

INSTALLALING OPTIONAL UNITS
5. This step is required only for the USA
model.
Remove the handset bracket [J] from the
top cover (2 screws).
6. Cut off the TEL2 cover [K].
7. Thread the harness [L] through the
opening in the counter bracket [M] and the
TEL2 cover opening. Then attach the
counter unit to the top cover
(USA models: use the screws that were
removed in step 5).
8. Secure the mechanical counter [N] to the
bracket (1 screw).
9. Connect the counter harness [O] and
place the connector into the recess under
the PSU harness as shown.
Then replace the top cover.
10. Plug in the machine and turn on the main
switch. Make some copies and check
whether the counter works.
End of Procedure
[J]
[K]
3-4
21 May, 1999
[N]
[M]
H547I503.WMF
[O]
H547I504.WMF
[L]