General; Installation; Unpacking; Location - Vulcan-Hart ML-114825 Installation And Operation Manual

Vulcan-hart electric tilting skillet operation manual vects16 ml-114825

Hide thumbs Also See for ML-114825:

Table of Contents

Installation, Operation and Care of

ROUND ELECTRIC TILTING SKILLET

MODEL VECTS16

PLEASE KEEP THIS MANUAL FOR FUTURE USE

GENERAL

Your Vulcan Round Tilting Skillet is a versatile piece of equipment. It allows you to stew, simmer, pan

fry, braise, grill, or saute, and all with a very uniform heat pattern. Capacity of Model VECTS16 is

16 gallons (60.6 L).

Vulcan tilting skillets are produced with quality workmanship and material. Proper installation, usage

and maintenance of your tilting skillet will result in many years of satisfactory performance.

It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions

provided.

Before installing, verify that the electrical service agrees with the specifications on the rating plate

located on the right side panel as you face the machine. If the supply and equipment requirements do

not agree, do not proceed with the installation. Contact your dealer or Vulcan-Hart Company

immediately.

This tilting skillet was inspected before leaving the factory. The transportation company assumes full

responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking, check

for possible shipping damage. If the tilting skillet is found to be damaged, save the packaging material

and contact the carrier within 15 days of delivery.

Carefully unpack tilting skillet and place in a work-accessible area as near to its final installed position

as possible.

When installed, minimum clearances from combustible and noncombustible construction are 0" at the

sides and

" (1.9 cm) at the rear.

– 3 –

Table of Contents

Vects16