Replacing The Display Assembly; Procedure; Post-Requisites - Dell XPS 15 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Place the palm-rest assembly at the edge of the table with the speakers facing
away from the edge.
2 Align the screw holes on the palm-rest assembly with the screw holes on the
display hinges.
3 Replace the screws that secure the display hinges to the palm-rest assembly.
4 Adhere the tape and route the touch-screen cable through the routing guides
on the fan.
5 Connect the touch-screen cable and display cable to the system board.
6 Replace the screw that secures the display-cable bracket to the system board.
Post-requisites
1 Replace the wireless
2 Replace the battery.
3 Replace the base
computer. After working inside your computer,
After working inside your
card.
cover.
computer. For more
Replacing the display assembly
29
68